An OBD-II engine diagnostics app that connects via a Wi-Fi/Bluetooth ELM327 adapter.
This car diagnostics app displays data from various vehicle control units using an ELM327 OBD-II adapter. It shows real-time graphs, allows you to save and review them later, and can read and reset engine fault codes (DTCs).
You can set custom min/max values for each sensor/PID to trigger an alarm when those limits are reached.
Compatible with both Bluetooth and Wi-Fi ELM327 OBD adapters.
For best results, use adapters version V1.5 to V2.1. Many users report issues with newer versions.
Important Note!
ELM327 adapters only work with OBD2-compliant vehicles:
• Cars manufactured in the USA since 1996.
• Cars in European countries since 2001 (gasoline) and 2003 (diesel).
• Cars in Japan since approximately 2000.
In addition to standard OBD-II parameters, the app supports enhanced, brand-specific PIDs for the following manufacturers:
The list includes:
BMW - (DIESEL, E91+AT)
BYD - (MT20U, ABS)
Chery - (MT20U, MT20U2, ActecoME797)
Chrysler/Dodge - (DIESEL, AT)
Citroen - (C4, C5, Sagem2000, CAN/AT6, EDC16C3 , MEV17.4.2)
Daewoo - (SiriusD42)
Fiat - (IAW49F, IAW5SF)
Ford - (ECU, PWM/AT, PWM/ABS, CAN/DIESEL, CAN/AT, CAN/TPMS, CAN/ABS )
Geely - (MT20U, MT20U2, M797)
GM/Chevrolet/Pontiac - (ECU, AT, ABS, SiriusD42)
GreatWall - (MT20U2, EOBD, CAN/4D20)
Honda - (Fit, Accord, CRV/DIESEL, Insight)
Jeep - (ECU, DIESEL, AT, TPMS)
KIA, Hyundai -~15 PIDs for each model(ATF Temperature,
Knock detected and etc)
Land Rover - (RANGE/3.6L, DISC4/3.0L, DISC3/TD6, FL2/TD4)
Lifan - (MT20U, MT20U2, ActecoME797, ME1788, ABS)
Mazda - (ECU, AT, ABS, CAN/TPMS, CAN/SWA)
Mercedes - (W203/CDI, W169/CVT, W168)
Mitsubishi - (CAN/ECU, CAN/CVT, CAN/SS4II, CAN/AWC, MUT/OBD, MUT/GDI)
(Please note: Mitsubishi models from roughly 2000 or earlier may not support OBD and therefore cannot work with ELM327)
Nissan - (CAN/ECU, CAN/CVT, CAN/AWD, CAN/METER, CONSULT2)
Opel - (ECU, AT, ABS, X18XE, Z16XE, Y17DT, CDTI1.6L, CDTI1.3L)
Peugeot - (MEV17.4.2, EDC16C3, ME744, AL4/CAN, AL4/KWP)
Renault - (CAN/ECU, CAN/DIESEL, KWP/DIESEL, Sagem2000, KWP/EMS3132)
Skoda - (CAN UDS TSI/TFSI)
SsangYong - (KWP/ECU, KWP/AT5, D20DT, CAN/D20DTF, CAN/DSI6)
Subaru - (ECU, ECU/DIESEL, SSM2, SSM2/DIESEL, SSM2/AT, KWP/ABS)
Suzuki - (CAN/ECU, KWP/ECU)
Toyota - (CAN/ECU, KWP/ECU, Prius10,Prius20,Prius30/Alpha,Prius30/AC)
VAG - (TDI/2.5L, CAN UDS TSI/TFSI)
Volvo - (D5/P3)
VAZ - (Yanvar 7.2, Itelma VS5.1 R83, Itelma M73, Itelma M74
KWP/CAN, AT/JATCO, AMT/ZF, Vesta/Largus K4M,H4M)
GAZ - (MIKAS10.3/11.3, MIKAS11/E2)
ZAZ - (MIKAS10.3/11.3, MR140)
UAZ - (MIKAS10.3/11.3, MIKAS11/E2, M86CAN)
This list of models and parameters is regularly updated.
Not every PID listed for a specific brand will be supported by your car. For convenience, you can filter the required PID types in "Settings / PID types".
For certain car brands (currently some Mitsubishi models), the app offers the ability to control various systems (e.g., activate a cooling fan, fuel pump, etc.).
To read MUT parameters and control actuators on CAN-bus Mitsubishi models (Montero/Pajero IV, Outlander 2, etc.), create one profile using the ISO 9141-2 protocol. In your other profiles (for reading CAN parameters), keep the protocol set to ISO 15765-4 CAN (11bit 500K) or Auto.
Note: Not all Mitsubishi CAN-bus models support ISO 9141-2 connectivity.
The app provides extensive capabilities for creating custom parameters.
What's New in the Latest Version 3.5.9
Last updated on Sep 30, 2024
Minor bug fixes and improvements. Install or update to the newest version to check it out!
Tags : Auto & Vehicles
